Study on divertor plasma behavior through sweeping strike point in new lower divertor on EAST

A series of L-mode discharges have been conducted in the new ‘corner slot’ divertor on the Experimental Advanced Superconducting Tokamak (EAST) to study the divertor plasma behavior through sweeping strike point. The plasma control system controls the strike point sweeping from the horizontal target to the vertical target through poloidal field coils, with keeping the main plasma stability. The surface temperature of the divertor target cools down as the strike point moves away, indicating that sweeping strike point mitigates the heat load. To avoid the negative effect of probe tip damage, a method based on sweeping strike point is used to get the normalized profile and study the decay length of particle and heat flux on the divertor target λ_js, λ_q. In the discharges with high radio-frequency (RF) heating power, electron temperature T_e is lower and λ_js is larger when the strike point locates on the horizontal target compared to the vertical target, probably due to the corner effect. In the Ohmic discharges, λ_js, λ_q are much larger compared to the discharges with high RF heating power, which may be attributed to lower edge T_e.     

“聚丙烯酸酯的合成及降凝性能评价”综合实验能力考核平台

设计了以柴油中饱和烃含量及碳数分布测定、聚丙烯酸高级醇酯（PTA）的合成与纯化、PTA的红外表征与分子量测定、PTA降凝性能评价等4个模块组成的综合实验，作为化工专业实验的考核及成绩评定平台。这种考核方式将过程考核与结果考核融合，将笔试、操作、设计融合，可以全面准确地考核学生的有机合成、仪器分析等基础实验技能，同时考核综述、数据处理、实验设计等综合实验能力和实验室工作素质。此外，还能够有效训练学生的学习能力、解决问题能力、实践能力和创新能力，并促进了实验教学水平提高。     

Asymptotic growth bounds for the 3‐D Vlasov‐Poisson system with point charges

In this article, we consider the asymptotic behavior of the classical solution to the 3‐dimensional Vlasov‐Poisson plasma interacting repulsively with N point charges. The large time behavior in terms of diameters of its velocity‐spatial supports is improved to O(t^2/3+ϵ) for any ϵ>0.     

A study on anomalous yield drop behaviour in modified beta titanium alloys

ABSTRACT

The yield drop phenomenon observed in the Ti–15V-3Al–3Sn-3Cr (Ti–15–3) beta-titanium alloy and its anomalous behaviour in the boron and carbon added Ti–15–3 alloys have been studied. While the base and the carbon containing alloys exhibit yield drop, the boron containing alloy with smaller grain size than base alloy does not appear to show this phenomenon. Tensile tests were interrupted at different stress levels followed by analyses of slip lines and sub-structural characteristics using scanning and transmission electron microscopes to understand this anomalous yield point phenomenon. Infrared thermal imaging technique was used to map the strain localisation and the spatiotemporal evolution of deformation along the gauge length of the specimens during the tensile tests. Deformation in these alloys initiates only in a few grains. Pile-up of dislocations in these grains subsequently triggers the formation of dislocations in other grains and their rapid multiplications. The spreading of deformation by the generation of dislocations from pile up dislocations in one grain to neighbouring un-deformed grains and their rapid multiplication to new regions influence the yield drop phenomenon and its characteristics. It is shown in this study that microscopic instability in the grain level is a necessary, but not the sufficient condition for the manifestation of macroscopic instability during tensile deformation in polycrystalline materials. The presence of boride particles at grain boundaries restricts the slip transfer across the grains as well as the spreading of deformation to new regions, which causes the suppression of yield drop in the boron containing alloy.     

Study of the performances of an oxygen carrier: Experimental investigation of the binder's contribution and characterization of its structural modifications

The aim of this work is to investigate the contribution of the binder (NiAl₂O₄) on the performances of the oxygen carrier NiO/NiAl₂O₄. To this purpose, oxidation/reduction cycles have been performed in a fixed bed reactor using CO as a fuel. The results reveal that the binder can react with the fuel to form CO₂, and that its total reduction capacity increases with temperature. XRD characterizations performed on the binder (on the fresh and after several cycles) show a shift of the diffraction peaks of NiAl₂O₄ toward the ones of γ-alumina, which can be attributed to a progressive decomposition of NiAl₂O₄ to alumina and NiO.